Product ID:SPEEDPRO INT/EXT FLAT WHITE/PASTEL
MSDS Date:10/06/1988
FSC:8010
NIIN:00-754-2608
MSDS Number: BPRKB

PPG INDUSTRIES, INC

260 KAPPA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: DO894

PPG INDUSTRIES, INC.

9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

CALCIUM CARBONATE

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 1%

ACGIH TLV: 10.00 MG/M3

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5%

ACGIH TLV: 10 MG/M3

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 15%

ACGIH TLV: 10.00 MG/M3

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10 - 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1%

ACGIH TLV: 50.00 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 20 - 25%

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 35 - 50%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 5-10%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INGESTION: HARMFUL OR FATAL IF
SWALLOWED. EYE: IRRITATION. SKIN: SLIGHT IRRITATION. INHAL:
HARMFUL. IRRITATES EYES, NOSE & THROAT. CHRONIC: ANIMALS INHAL
MASSIVE QTY OF TITANIUM DIOXIDE DUST DEVELOPED LUNG TUMORS. MAY
DAMAGE KIDNEYS AND LIVER.
Explanation of Carcinogenicity:ANIMAL INHALING MASSIVE QTY OF TITANIUM
DIOXIDE DUST IN A LONG TERM STUDY DEVELOPED LUNG TUMORS.
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION AND VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
CRACKING, BURNING, REDNESS AND SWELLING ARE CONDITIONS ASSOCIATED
WITH EXCESSIVE SKIN CONTACT.

First Aid:INGEST: DONT INDUCE VOMITING. EYE: FLUSH EYES IMMED W/WATER
15 MINUTES. SKIN: FLUSH IMMED W/PLENTY OF WATER. THEN WASH W/SOAP &
WATER. INHAL: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION &
OTHER SUPPORTIVE MEASURES IF NEEDED. OTHER: IF ANY OF FOLLOWING
OCCURS DURING OR FOLLOWING USE, CONTACT POISON CONTROL CTR/EMERG
ROOM OR DR IMMED: PERSISTANT SKIN/EYE IRRITATION OR BREATHING
DIFFICULTIES.

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGUISHER (CO2, DRY CHEMICAL,
UNIVERSAL AQUEOUS FILM FORMING FOAM) TO EXTINGUISH CLASS IIIB LIQ
FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, MAY BE USED
(PREFER FOG NOZZLE) TO COOL CLSD CNTNRS TO PREVENT PRESSURE BLDUP,
AUTOIGNIT, EXPLOSION W/HEAT. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED WITH PROPER RESPIRATORY, SKIN & EYE PROTECTION IN AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL W/SAWDUST,
VERMICULITE, OTHER ABSO RBENT AND PLACE INTO CONTAINERS FOR
DISPOSAL.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDING DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB LIQUIDS.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM, READ MATERIAL SAFETY DATA SHEET(S) FOR OTHER
COMPONENT(S) BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARDS OF ALL OF ITS P ARTS. AVOID REPEATED/LONG TERM CONTACT.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
RESPIRATOR.
Ventilation:GENERAL/LOCAL VENT(VOL/PATTRN) TO KEEP BELOW TLV, LEL,
REMOVE DECOMP PRODUCTS DURING WELDING, FLAME CUTTING COATED SRFCS
Protective Gloves:WEAR NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:WEAR CHEMICAL TYPE SPLASH GOGGLES.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING INCLUDING
IMPEREABLE APRON CONSTRUCTED OF NITRILE, NEOPRENE OR LATEX RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

Boiling Pt:B.P. Text:100 TO 244C
Vapor Pres:17.3
Vapor Density:> AIR
Spec Gravity:1.30
Evaporation Rate & Reference:34 (BU AC=100)
Solubility in Water:59.0 %
Percent Volatiles by Volume:75.50

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:HAZARDOUS DECOMP WHEN HEATED. WELDING,
BRAZING OR FLAME CUTTING ON COATED SURFACES MAY PRODUCE: CARBON
MONOXIDE.

Waste Disposal Methods:WASTE MUST BE DISPOSED OF IN ACCORDANCE WITH
FEDERAL STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILITY .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.